Stabilizing Solid-state Lithium Metal Batteries through In Situ Generated Janus-heterarchical LiF-rich SEI in Ionic Liquid Confined 3D MOF/Polymer Membranes

Pursuing high power density lithium metal battery with high safety is essential for developing next-generation energy-storage devices, but uncontrollable electrolyte degradation and the consequence formed unstable solid-electrolyte interface (SEI) make the task really challenging. Herein, an ionic liquid (IL) confined MOF/Polymer 3D-porous membrane was constructed for boosting in situ electrochemical transformations of Janus-heterarchical LiF/Li₃N-rich SEI films on the nanofibers. Such a 3D-Janus SEI-incorporated into the separator offers fast Li⁺ transport routes, showing superior room-temperature ionic conductivity of 8.17×10⁻⁴ S cm⁻¹ and Li⁺ transfer number of 0.82. The cryo-TEM was employed to visually monitor the in situ formed LiF and Li₃N nanocrystals in SEI and the deposition of Li dendrites, which is greatly benefit to the theoretical simulation and kinetic analysis of the structural evolution during the battery charge and discharge process. In particular, this membrane with high thermal stability and mechanical strength used in solid-state Li||LiFePO₄ and Li||NCM-811 full cells and even in pouch cells showed enhanced rate-performance and ultra-long life spans.     

Valence-variable Catalysts for Redox-controlled Switchable Ring-opening Polymerization

As a representative class of sustainable polymer materials, biodegradable polymers have attracted increasing interest in recent years. Despite significant advance of related polymerization techniques, realizing high sequence-control and easy-handling in ring-opening (co)polymerizations still remains a central challenge. To this end, a promising solution is the development of valence-variable metal-based catalysts for redox-induced switchable polymerization of cyclic esters, cyclic ethers, epoxides, and CO₂. Through a valence-determined electron effect, the switch between different catalytically active states as well as dormant state contributes to convenient formation of polymer products with desired microstructures and various practical performances. This redox-controlled switchable strategy for controlled synthesis of polymers is overviewed in this Review with a focus on potential applications and challenges for further studies.     

Citronellol-Based Long-Lasting Antibacterial Cotton Fabrics without Bacterial Resistance

Antibacterial cotton helps prevent the growth and spread of harmful microorganisms, reduces the risk of infection, and has a prolonged service life by reducing bacterial degradation. However, most antibacterial agents used are toxic to humans and the environment. Citronellol-poly(N,N-dimethyl ethyl methacrylate) (CD), a highly effective antibacterial polymer, is synthesized from natural herbal essential oils (EOs). CD exhibited efficient, rapid bactericidal activity against Gram-positive, Gram-negative, and drug-resistant bacteria. Citronellol's environmental benignity makes CDs less hemolytic. Notably, negligible drug resistance developed after 15 bacterial subcultures. The CD-treated cotton fabric displayed better antibacterial performance than AAA-grade antibacterial fabric, even after repeated washing. This study extends the practical application of EOs to antibacterial surfaces and fabrics, which is promising for use in personal care products and medical settings.     

Facile synthesis of 1-naphthols through a copper-catalyzed arylation of methyl ketones with o-bromoacetophenones

The coupling reactions of simple methyl ketones with o-bromoacetophenones and subsquential cyclization reactions were realized to produce a range of 1-naphthols. These cascade reactions were initiated by a rare Cu-catalyzed arylation reaction of methyl ketones with aromatic bromides.     

Sodium‐Doped Mesoporous Ni2P2O7 Hexagonal Tablets for High‐Performance Flexible All‐Solid‐State Hybrid Supercapacitors

A simple hydrothermal method has been developed to prepare hexagonal tablet precursors, which are then transformed into porous sodium‐doped Ni₂P₂O₇ hexagonal tablets by a simple calcination method. The obtained samples were evaluated as electrode materials for supercapacitors. Electrochemical measurements show that the electrode based on the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets exhibits a specific capacitance of 557.7 F g^?1 at a current density of 1.2 A g^?1. Furthermore, the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets were successfully used to construct flexible solid‐state hybrid supercapacitors. The device is highly flexible and achieves a maximum energy density of 23.4 Wh kg^?1 and a good cycling stability after 5000 cycles, which confirms that the porous sodium‐doped Ni₂P₂O₇ hexagonal tablets are promising active materials for flexible supercapacitors.     

Ferric Phosphate Hydroxide Microstructures Affect Their Magnetic Properties

Uniformly sized and shape-controlled nanoparticles are important due to their applications in catalysis, electrochemistry, ion exchange, molecular adsorption, and electronics. Several ferric phosphate hydroxide (Fe₄(OH)₃(PO₄)₃) microstructures were successfully prepared under hydrothermal conditions. Using controlled variations in the reaction conditions, such as reaction time, temperature, and amount of hexadecyltrimethylammonium bromide (CTAB), the crystals can be grown as almost perfect hyperbranched microcrystals at 180 °C (without CTAB) or relatively monodisperse particles at 220 °C (with CTAB). The large hyperbranched structure of Fe₄(OH)₃(PO₄)₃ with a size of ∼19 μm forms with the “fractal growth rule” and shows many branches. More importantly, the magnetic properties of these materials are directly correlated to their size and micro/nanostructure morphology. Interestingly, the blocking temperature (T_B) shows a dependence on size and shape, and a smaller size resulted in a lower T_B. These crystals are good examples that prove that physical and chemical properties of nano/microstructured materials are related to their structures, and the precise control of the morphology of such functional materials could allow for the control of their performance.     

The Comparative Study of Reaction Mechanisms and Catalytic Performances of Cu–SSZ-13 and Fe–SSZ-13 for the NH3-SCR Reaction

Catalysis Surveys from Asia - The catalytic performances and mechanism differences of model catalysts Cu–SSZ-13 and Fe–SSZ-13 with similar metal content and Si/Al ratio were compared....     

One-pot synthesis of PDMAEMA nanocapsules for controlled release of hydrophobic cargo

In this work, poly((N,N-dimethyl amino)ethyl methacrylate) (PDMAEMA) homopolymers are synthesized using RAFT technique, which is then used as stabilizers to prepare miniemulsion droplets in a toluene/hexadecane(HD)/1,2-Bis-(2-iodoethyl)ethane(BIEE)/hydrophobic molecule/water mixture. Upon the reaction between BIEE and the stabilizers of miniemulsion droplets, the polymeric nanocapsules are formed and capable of encapsulating hydrophobic molecule in their oil core in one-step reaction. The release of hydrophobic cargo from the nanocapsules can be controlled by the variation of amount of surfactant (Tween®20) in the release medium and a long duration sustained release was achieved.     

Enhanced Enzymatic Synthesis of a Cephalosporin,Cefadroclor, in the Presence of Organic Co-solvents

In this study, we investigated the enzymatic synthesis of a semi-synthetic cephalosporin, cefadroclor, from 7-aminodesacetoxymethyl-3-chlorocephalosporanic acid (7-ACCA) and p-OH-phenylglycine methyl ester (D-HPGM) using immobilized penicillin G acylase (IPA) in organic co-solvents. Ethylene glycol (EG) was employed as a component of the reaction mixture to improve the yield of cefadroclor. EG was found to increase the yield of cefadroclor by 15–45%. An investigation of altered reaction parameters including type and concentration of organic solvents, pH of reaction media, reaction temperature, molar ratio of substrates, enzyme loading, and IPA recycling was carried out in the buffer mixture. The best result was a 76.5% conversion of 7-ACCA, which was obtained from the reaction containing 20% EG (v/v), D-HPGM to 7-ACCA molar ratio of 4:1 and pH 6.2, catalyzed by 16 IU mL^?1 IPA at 20 °C for 10 h. Under the optimum conditions, no significant loss of IPA activity was found after seven repeated reaction cycles. In addition, cefadroclor exhibited strong inhibitory activity against yeast, Bacillus subtilis NX-2, and Escherichia coli and weaker activity against Staphylococcus aureus and Pseudomonas aeruginosa. Cefadroclor is a potential antibiotic with activity against common pathogenic microorganisms.